Titan Solar Power System offers the most versatile and dynamic solar power system in the market. The company delivers durable and high quality solar power products and a strong after sales support network. Titan Solar Power System comes with portable solar power generators that have the flexibility to provide reliable solar backup for any situation.
Nevertheless, Titan Solar Power System may get into any problem during the use that you can fix by yourself with some helpful tips. This article will provide you with some useful tips and techniques for troubleshooting a Titan Solar Power System.
A. The Titan Solar Power System Is Not Turning On
1. Battery Is Not Installed
1) Connect The Battery Pack
1) Check and confirm that the main power switch present on the Titan Solar Generator is in the Middle Position (Off Position)
2) Place the Titan Power Module on top of the battery pack, aligning the rubber feet of the solar generator with the circular indentations on the battery pack.
3) Adjust and tighten the four metal latches located on the sides of the battery pack. It may be necessary to depress the generator to close the latch.
2) Fully Charge The Battery Pack
1) Switch On the main power switch on Titan Power Module by flipping Up (AC/DC) or flipping Down (DC only).
2) Titan Solar Generator’s Battery pack can be charged in three ways: (i) From Solar, (ii) AC (Wall Charger), (iii) Car Cigarette Port Charger.
3) Charge up your battery using the supplied AC charger or another charging source given above.
2. Power Switch Is Not Turned On
1) Check the main power switch on Titan Solar Generator, it should be in the On position.
2) The main power switch has three positions. The switch is Off in the middle position.
3) Flip the main power switch Up for AC/DC power, or down for DC only.
3. Battery Has Overheated
1) Overheated batteries are one of the reasons why the Titan Solar Power System is not starting.
2) The battery may get overheated if you have been using the Titan Solar Power System under a heavy load or in a high temperature.
3) Stop the solar power generator and relocate it to a cool place to allow the time to cool down.
4. Battery Has Overloaded
1. If you overload the Titan Solar Power System then its battery pack would turn Off in order to protect batteries.
2. For Example: For a single battery running Titan Solar Generator over 1500 watts will turn Off the system for safety.
3. To reset the battery: Turn Off the Titan Solar Generator off (power switch in the middle position); Wait for a few seconds, then turn it back On.
5. Battery Has Overdischarged
1) The battery might have gone into the safety mode being over discharged or drained below the normal.
2) This may happen due to the Titan Solar Power System having been running for a long time or running a DC load on a low battery.
3) Recharge the battery by one of the following ways:
a) AC Charger: The battery of Titan Solar Generator can be completely charged through an AC charger by plugging into a wall outlet.
b) Solar Charger: For solar charging connect two to five panels to an MC4 to SAE adapter, after that then plugged into the 12V charging port.
B. The Titan Solar Power System Battery Is Not Charging
Sometimes Titan Solar Generator doesn’t charges the battery pack, and below are the reason with solution:
1. The Problem
1. When the Solar Power System indicates that the battery is Full when charging or will not charge further and the system voltage is reached over 29V.
2. But when the AC or solar charger is removed, the voltage again drops down.
2. Possible Reason
1. The battery was charged at above 40 Ampere.
2. Therefore for safety reasons further charging has been stopped to protect the battery from going into overcharged condition.
3. Solution
1. Turn off the main power switch of the Titan Solar Generator (middle position)
2. Unplug any devices attached to charging ports (AC charger, car charger, solar panel).
3. Wait for 5 seconds, then turn On the Titan Solar Power System.
C. The Titan Solar Power System Is On But There Is No AC Power
If the Titan Solar Power Generator is not providing AC power then there may be following reasons with possible solutions:
1. Power Switch Is In The Down Position (DC only mode)
1. If the main power switch on the Titan Solar Generator is in Down Position (DC only mode) then AC power will not work.
2. Switch the power switch to the Up position (DC and AC mode).
2. The Battery Is Over Drained
1. When the voltage of the battery falls below 20 Volts, the inverter will automatically turn off to safeguard the battery.
2. If this occurs, the battery must be recharged before AC power may be used.
3. Circuit Breaker Is Tripped
1. The Titan Solar Power Generator comes with a resettable circuit breaker button for the AC outlets.
2. If any one of the circuit breakers present on the Titan Solar Generator has been tripped, then simply press the breaker back again and AC power will be On.
3. If circuit breaker(s) are again tripping it means the solar generator is overloaded. For example: use recommended load up to 1500 Watt with one battery pack.
D. The Titan Solar Power System Has No DC Power
If there is no DC Power, then two possible situations with solutions are given below:
1. The Power Switch Is Turned Off
1. The main power switch has three positions. In the middle position it will be Off.
2. Turn Down the power switch for DC power only, or turn it Up for DC & AC power.
2. DC Fuse Has Blown
1. The maximum amount of current the DC outlets can draw is 20 Ampere.
2. If the load is over 20 Ampere the fuse will blow off.
3. To fix this the fuse should be replaced with a new one of 20 Ampere rating.
4. Unscrew and remove the fuse cover. Then, you will be able to remove the defective fuse and replace it with a new one.
Conclusion
The Titan Solar Power System is an extremely powerful solar power generator that comes with a highly efficient pure sine wave inverter and expandable battery solution. The Titan Solar Power Generator offers versatility and flexibility to utilise power in most of the situations. The unit comes with outclass safety and protection systems installed.
The build quality and durability of The Titan Solar Power System has not matched with other solar generators in the market.Nevertheless, in some situations customers face difficulty in operating the Titan Solar Power Generator. Most of the time the problem can be resolved at the consumer level without getting into any complications.
This article has outlined all the scenarios that a customer can face in operating a Titan Solar Power Generator. It is highly recommended to thoroughly read the unit’s User Manual before doing any troubleshooting task. If the problem still exists, then contact the customer support team or obtain a company’s warranty service.
