There is some debate among users about the best way - how to maintain a power inverter. Here is the definitive guideline which will help you to take care of a power inverter.
The benefits of power inverter are numerous. It takes a whole lot to invest in one because they are no cheap quality inverters. It is a whole lot if, after investing in an inverter, it becomes faulty due to carelessness and neglect.
In this case, fixing it takes a whole lot. And sometimes, even after it set, it still malfunctions. With this, it is essential to know all the tips and ideal ways in which you can take care of a power inverter, to keep it durable and expand the lifespan of the power inverter—looking for ways to maintain a power inverter? Then this article is for you.
Table of Contents
- 1 Ways To Maintain Your Power Inverter
- 1.1 Place Your Power Inverter In A Ventilated Area
- 1.2 Clean Daily
- 1.3 Keep Your Battery Always Charged
- 1.4 Change Faulty Batteries
- 1.5 Avoid Overloading The Inverter
- 1.6 Keep It Away From Heat Or Flames
- 1.7 Always Discharge Your Batteries
- 1.8 Keep Out Of Children's Reach
- 1.9 Keep The Battery Terminals Clean: Free From Corrosion And Rust
- 2 Conclusion
Ways To Maintain Your Power Inverter
The following ways are ways you could maintain your power inverter;
Place Your Power Inverter In A Ventilated Area
Placing your power inverter in a ventilated area would spare you a whole lot. When your inverter is placed in an area where there is no ventilation, what happens is that the heat forms dew or water drops which may cause overheating or rust.
Water drops on your inverter: outside or inside is a bad idea because most materials used to make the inverter need to be moisture free. So always endeavor to place your inverter in an airy and well-ventilated area.
Sometimes, things like dust are inevitable. So do not let dust overwhelm your inverter. Try to dust and keep it free of dust and dirt stains like oils. Using a cotton cloth, wipe daily to ensure the surface and sides of your inverter is clean and free from dust.
Keep Your Battery Always Charged
Allowing the battery of your power inverter to run down completely reduces the lifespan of the battery so try to keep it charged at all times. Allowing it to frequently run down completely before recharging it, is not advisable.
Change Faulty Batteries
If the battery of your inverter ever gets damaged or develops any fault, do not attempt using it anymore or combining it with a new one. It could damage the whole inverter or cause an explosion. The best thing in a case of a faulty battery is to replace it with a new one.
Avoid Overloading The Inverter
You should know the capacity of your power inverter and do not overload it with high electrical devices and appliances as this may cause an explosion or could damage the inverter.
Whenever an appliance is not in use, unplug it so as to reduce the load of the power inverter and also extend its lifespan.
Keep It Away From Heat Or Flames
Heat or flames could damage your power inverter. It is not good for it and its battery, so endeavor to avoid any flame or heat around your inverter.
Always Discharge Your Batteries
Sometimes, there is no power outage so you tend not to remember or use the inverter. With this, the batteries of the inverter are always fully charged. And for a long time, you discover you have not used your inverter.
However, this is bad. Even when there is always constant power supply, try to make use of your inverter just to discharge the batteries, at least once in every month is good.
Keep Out Of Children's Reach
To a lot of kids, especially at the young stage, everything is a toy to them. If you install the inverter at their reach, they might spill food and liquids regularly on it. Play with it carelessly, try to open it which might end in a full or partial electric shock and a damaged inverter.
In as much as you're trying to keep the inverter out of the reach of children, ensure that wherever you want to install it, is airy and well ventilated.
Keep The Battery Terminals Clean: Free From Corrosion And Rust
Always keep the terminals of the battery free from rust and any form of corrosion. You can do this by mixing a solution that includes baking soda and hot water.
Using an old toothbrush or any convenient tool, carefully apply the hot water and baking soda solution on the battery terminals. To avoid corrosion and rust on the bolts and other metal parts like bolts and nuts, lubricate it by oiling it with petroleum jelly.
The essence of avoiding corrosion and rust is that rust on the terminal stops the flow to and from the battery. It further reduces the performance of the battery and it spoils the general appearance and beauty of the inverter.
If the batteries of your inverter do not last long anymore, the inverter is almost useless. Because the batteries of an inverter are basically responsible and enhance its performance and effectiveness, more maintenance is done on the batteries.
Nevertheless, general maintenance is advised and highly recommended. Applying maintenance to your inverter prolongs its lifespan and leaves you getting the most out of it.
You may read also: